Trade waste grease arrestors and grease reduction devices approved by Power and Water Corporation in the Northern Territory as at 11 June 2020.
Before purchasing or installation commences, please contact Power and Water’s Trade Waste Department to ensure that a Trade Waste Application Form has been completed and plumbing plans for installation have been stamped approved by Power and Water. Once an application has been received, Power and Water will contact you to discuss the correct and most suitable pre-treatment equipment for your business.
Any businesses unable to install an in-ground grease trap must provide a report by a hydraulic consultant confirming that a minimum 1000 litre grease trap cannot be installed. Power and Water must approve, in writing, the installation of a grease reduction device before installation is carried out. Only products listed in the table below are permitted in the Northern Territory.
Any pump systems related to above ground grease traps will require written pre-approval by Power and Water and Environmental Health before installation.
Installation of a grease trap or grease reduction device can only be carried out by an NT licensed plumber in accordance with Australian Standard 3500. The location of these devices must ensure they are readily accessible at all times and sample points supplied on the outlet to sewer in all cases. It is the applicants’ responsibility to contact Plumbing Building Advisory Services on 8999 8985 where required.
Please note: Pre-treatment equipment installed in the Northern Territory that does not meet these standards and guidelines, may require removal at the cost of the installer.
Print fact sheet - Approval of grease arrestors and grease reduction device
Product name | Manufacturers' contact details | Suppliers items | Special conditions |
---|---|---|---|
ACO Grease Arrestors | ACO Polycrete Pty Ltd Address: 467 Tufnell Road, Banyo QLD 4014 Contact: Greg Facey Phone 07 32924500 | Lipumax Basic o NS4 (1000ltr) o NS7 (1500ltr) o NS10 (2000ltr) Eco Jet Basic o NS5.5 (1000ltr) o NS7 (1500ltr) o NS10 (2000ltr) | |
All Cast – Precast concrete grease arrestor | All Cast NT Address: 1041 Makagon Road, Berrimah Contact: Bob Houlihan Phone: 8947 1154. | Minimum 1000 Litres + | |
CV Plastics | CV Plastics: Address: 15 Deborah Street, Golden Square, Bendigo VIC 3555 Contact: Paul Chuter Phone: 03 54428728 Email: sales@cvplastics.com.au | Minimum 1000 Litres + | |
Darwin Precast – Precast concrete grease arrestor | Darwin Precast Products Address: 8 Hardy Road, Pinelands Contact: Greg Hughes Phone: 8932 1446 or 0418 853 49 | Minimum 1000 Litres + | |
Eclipse Grease Arrestors | Eclipse Environmental Australia Address: 73 Victoria Street, Smithfield NSW 2164 Contact: Andrew Borg Phone: 0424 419 075 | GA1000 (1000L) GA2000 (2000L) GA2500 (2500L) GA3000 (3000L) GA4000 (4000L) GA5000 (5000L) | Available in Fiberglass/Stainless Steel for above and below ground installations. *use of risers must be approved by Power and Water prior to Installation. |
Everhard Industries | Everhard Industries Website www.everhard.com.au Contact: Joseph Langford Phone: 07 36376444 Email: Joelangford@everhard.com.au | Minimum 1000 Litres + | |
Grease Muncher Arrestors | Global Water Group Phone: 08 8275 8000 Email: sales@globalwatergroup.com.au | Grease Muncher Model GM700 | A Grease Muncher unit is only for use under specific conditions and must be approved by Power and Water prior to installation |
Halgan Polypropylene modular grease arrestor | Darwin: Flowmaster Industrial Supplies Address: Caroyta Court, Coconut Grove Contact: Tom Cummins Phone: 8948 2538 Alice Springs: Reece Plumbing Address: 87 Smith Street, Alice Springs Contact: Martin King Phone: 8953 7077 | MGT 1000 – 5000 | The use of Risers must be approved by Power and Water prior to installation. |
Mascot Engineering Lightweight Glass Reinforced Concrete Grease Arrestors | Darwin and Alice Springs: Mascot Engineering Contact: Mascot 4YOU Phone: 1300 885 295 Email: sales@mascoteng.com.au Website:www.mascoteng.com.au | QGA Series 1000-3000 | |
NT Acrylics and Plastics – Prefabricated PVC grease arrestor | NT Acrylics and Plastics Address: 6-7/55 Pruen Road, Berrimah 0828 Contact: Anna Commons Phone: 8984 4585. | Minimum 1000 Litres + | |
Port Capital | Tradelink Katherine: 17 Crawford Street, Katherine NT 0850 08 8995 8060Bryce Heinrich Berrimah: Cnr Stuart Highway & Angliss St, Berrimah NT 0828 08 8995 8020Mathew McLennan Coconut Grove: Tenancy 2/8 Osgood South Development, Osgood Drive, Eaton NT 0820 08 8995 8080Ashley Norman | PCGT-1000 - PCGT 5000 |
|
Product Name | Manufacturers' contact details | Suppliers items | Special conditions |
---|---|---|---|
Grease Guardian | Darwin Aqua – Treat NT Pty Ltd Address: 101 Reichardt Road, Winnellie Contact: Richard McElwee Phone: 8947 2133 Alice Springs: Alice Hospitality Supplies Pty Ltd Address: Ghan Road, Alice Springs NT 0871 Contact: David Heinzel Phone: 8955 5388. | D1 – D5 | Only for use upstream of an authorised in ground grease trap. Must adhere to Power and Water’s guidelines for installation and maintenance of the unit. |
Grease Shield | Sales: Arafura Catering Equipment Address: Shop 5, Parap Place, Parap Shopping Village, Parap, NT 0820 Phone: 8981665 Servicing: GK & Sons Electrics Address: 10/ 5 Hidden Valley Rd, Berrimah NT 0828 Coverage: Darwin and Katherine Contact: Gary Kohlman Phone: 08 8988 9019 Mobile: 0409 907 739 Aldirect Plumbing & Gas Fitting Address: 3/66a Smith St, Alice Springs NT 0871 Contact: Stephen Zanca Phone: 8953 5688 Mobile: 0411 822 401 | Only for use upstream of an authorised in ground grease trap. Must adhere to Power and Water’s guidelines for installation and maintenance of the unit |
For more information please contact the Power and Water Trade Waste team.