 |
 |
 |
Home > Doing Business > Building & Development > Water Services Connection Code > Technical Requirements
Technical Requirements - Procedural Requirements - Charging Requirements - Contact Us
| Technical Documents | Related Documents | Technical Fact Sheets & Guides | Technical Bulletins |
Power and Water has developed and approved the following technical documents that apply to development activity and with which a proponent must comply. Ancillary to these technical documents are a number of related documents that provide further guidance to a proponent of development activity.
Guidelines for Developers and Consulting Engineers for the Provision of Water and Sewerage Infrastructure in Subdivisions 1993 247.52kb PDFWater Supply and Sewerage Construction Master Specification 2004 2.78mb PDF
This document is a generic construction specification for the creation of infrastructure that is to be incorporated into Power and Water's network.
Water and Sewage Products Manual 2006
This document identifies those strategic products which Power and Water have approved for use in the creation of infrastructure to be incorporated into Power and Water's network.
Power and Water Standard Drawings 2004
These drawings define the materials, set out standard construction details and provide general design data for infrastructure to be incorporated into Power and Water's network.
Power and Water Trade Waste Code January 1, 2002 103kb PDF
(as approved by the Minister responsible for essential services in accordance with the Water Supply and Sewerage Services Act)
This document sets out a proponent’s rights and obligations relating to tradewaste discharge to Power and Water’s sewerage system.
Power and Water Metering Code 2006
(as approved by the Utilities Commission in accordance with the Water Supply and Sewerage Services Act
This document sets out a proponent’s rights and obligations relating to metering of water drawn from Power and Water’s water supply system.
Water Services Association of Australia (WSAA) Water Supply and Sewerage Codes 2002
These Codes may only be used as a general guide to supplement Power and Water‘s approved technical documents. These Codes have not been endorsed as an alternative to any Power and Water approved technical documents. Power and Water intends to review these Codes with a view to officially incorporating their use in development activity in the future.
A series of documents that provide advice to proponents to assist in meeting Power and Water’s technical requirements. A number of these fact sheets have both technical and procedural elements and appear on both the Technical and Procedural Requirement pages
Customer Information Handout 1 47kb PDF
Checklist and notes for water / sewer services drawings for developments / subdivisions;
Customer Information Handout 2 67kb PDF
Checklist for design of water / sewer services for extensions and subdivisions;
Customer Information Handout 3 58kb PDF
Checklist for design of water / sewer services for building development;
Customer Information Handout 5 96kb PDF
Disinfection of water mains - Using Sodium Hypochlorite with a water truck;
Customer Information Handout 7 60kb PDF
Backflow prevention for developments;
Customer Information Handout 8 46kb PDF
Pre-treatment guidelines for tradewaste generating process;
Customer Information Handout 9 49kb PDF
This document details Power and Water's requirements for applying reclaimed water for irrigation schemes;
Customer Information Handout 10 23kb PDF
This document details Power and Water's CCTV Inspection Form;
Customer Handout Multi-metering for Existing Units 136kb pdf
Multi-metering of Water Supply for Existing units;
Customer Handout Multi-metering for New units 116kb PDF
Multi-metering of Water Supply for New units;
The Connection Code documents may be under review please contact Land Development for information on current reviews.
Technical Requirements, Procedural Requirements and Charging Requirements
These documents are available in PDF format.
Download the free adobe acrobat reader.